Contacts

195030, Russia,
Saint-Petersburg,
Khimikov st., 28.

+7 (812) 319-30-40

111141, Moscow, Elektrodnaya st., 2 building 12-14

 

Continious clips

Application of manual and semi-automatic clipping machines for meat processing plants restricts the possibility of increasing the production of finished products. With the growth of production raises the question about the installation of automatic clipping machines, which are most often used in enterprises with a capacity of more than 5 tons per day. On such clipper use continuous belt clip. These clips are available on plastic tape or a casset-less version, with additional adapters, in an amount from 2500 to 5000 pieces, depending on the type. This allows non-stop to make a similar number of loaves of sausage, without stopping the technological process of production. The presence of different sizes allows you to use the shell from the minimum diameter d 20 d to a maximum 120. Depending on the size and material of the shell, is chosen the size you want the clip. Marking clips consisting of 4 numbers:

For example, 18 09 / 5 x 2.0

- The first pair of numbers - a move clips, can be 12, 15, 18 mm. More common in increments of 15 and 18 mm.
- A second pair of ebah - height legs. Maybe 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14 mm. The most common are 07, 08, 009, 10, 11, 12 mm.
- Third digit - the width of clip: 3, 4, 5 mm. Russia has used in the majority with a width of 5 mm.
- Fourth digit - the thickness of the clips. Maybe 1,0 1.25, 1,5, 1.75, 2.0, 2.2, 2.25, 2,5. The most common are: 1,5, 1.75, 2,0, 2,2 (or 2,25), 2,5.

Reccomendation for use of cf continious clips


Type of casingDiameter of casingPretreatmentSize of clips
GelatiniousSoak for 10-30 min in
10-20% salt solution at temperature of water 20°С
Step 18Step 15
35-401807/5*1,51507/5*1,5
45-501807/5*1,5
1809/5*2,0
1508/5*1,5
55-601809/5*2,01509/5*1,75
1509/5*1,75
65-701809/5*2,0
1801/5*2,2
1510/5*2,0
75-801801/5*2,0
1812/5*2,2
1510/5*2,0
85-901812/5*2,2
1812/5*2,5
100-1051812/5*2,2
1812/5*2,5
  
Polyamide45-45Soak for 30 min at temperature of water 20-25°С
1807/5*1,51507/5*1,5
1508/5*1,75
50-551807/5*1,51507/5*1,5
1508/5*1,75
60-651809/5*1,75
1809/5*2,0
1510/5*2,0
70-751809/5*2,0
1810/5*2,2
1510/5*2,0
80-851810/5*2,2
1810/5*2,2
1811/5*2,5
1510/5*2,0
90-1051812/5*2,2
1812/5*2,2
1812/5*2,5
  
Fibrous
(viscose-
reinforced)
40-45Soak for 20-30 min at temperature of water 30-40°С1807/5*1,51507/5*1,5
1508/5*1,75
45-501807/5*1,51508/5*1,5
50-551809/5*2,0

1508/5*1,5
1509/5*1,5
55-601809/5*1,751509/5*1,75
60-651809/5*2,01509/5*1,75
70-751809/5*2,01510/5*2,0
80-851810/5*2,0
1812/5*2,2
90-1051812/5*2,2
1812/5*2,5

 
  © CJSC «TechnoClip», 2001 — 2010
  © Design by Leks Image Studio, 2010.